just smile to the life :)

Hello there ,, I`m someone who lives in the earth XD of course I do. I am muslim and I like a lot of things include : reading , drawing , watching anime , and reading manga
>>the first reading word referred to the reading of books XD
I like the Photoshop very much even consider my self as beginner , and learning crafts is the most enjoyable thing I like to do in my free time ^ __^

My other blogs :
http://newmaw.tumblr.com/
http://mogamera.tumblr.com/

January292012

fuckyeahmakingstuff:

Necklaces always seem to get tangled in a jewelry box. This is a DIY tutorial to make a framed jewelry organizer that both displays your pretty necklaces and keeps them tangle-free.
وااو فكرة جميلة وعملية لتعليق وحفظ الإكسسوارات وفوق هذا لا تحتاج إلى أي جهد

You can either hang it on the wall or lean it against a vanity table.
Supplies:
thrifted vintage framepeg board cut to sizewood gluescissorsribbonknobs or hooksspray paint (optional)سنحتاج إلى
إطار صورة
وقطعة فلين مناسبة الحجم
غراء خشب
مقابض دواليب قديمة أو أي شيء يمكن الإستعانة به للتعليق Start with a vintage thrifted frame. You’ll want a piece of peg board cut down to the size of the inside of your frame. I got my 11 x 16 piece at a local hardware store and it cost $5 for the board and two cuts. I spray painted it a light shade of yellow, bu you could leave it natural as well.إذا لم يكن حجم القطعة الفلينية مناسب للإطار فقومي بقصة ^^ Before securing the peg board to the frame I make a couple loops for hanging dangling earrings. I cut a piece of ribbon about 3 inches long and strung it through two holes.إحدى الطرق للتعليق هلى الإستعانة بالشرائط
قومي بتثبيت الشريط كما في الصور I double knotted the back.Next I glued with wood glue the peg board to the back of the frame. If your frame has clips you can use those as well. My frame was really old and only had one clip so it needed something else to hold it in place.يمكنكم إن أردتم أن تقومو بضبغ القطعة الفلينية إذا لم يعجبكم لونها I picked up some of these knobs and hook on sale from my local Anthropologie. You can also look for them at antique stores.نأتي الأن إلى العلاقات والمقابض
ونقوم بتثبيتها بالفتحات الموجودة على لفلينةThe hook’s holes didn’t quite line up with the peg board’s so I tied ribbon through like I did for the earring loops.Then I installed my knobs and hung my jewelry. If your knobs are missing hardware in the back you can take it to your local hardware store and have them help you find the right bolt.
(Source.)
الأن يمكنكم الإستمتاع بها في أي وقت
وحفظ أدواتكم من الضياع والتشابك

Necklaces always seem to get tangled in a jewelry box. This is a DIY tutorial to make a framed jewelry organizer that both displays your pretty necklaces and keeps them tangle-free.

وااو فكرة جميلة وعملية لتعليق وحفظ الإكسسوارات وفوق هذا لا تحتاج إلى أي جهد

You can either hang it on the wall or lean it against a vanity table.

Supplies:

thrifted vintage frame
peg board cut to size
wood glue
scissors
ribbon
knobs or hooks
spray paint (optional)
سنحتاج إلى

إطار صورة

وقطعة فلين مناسبة الحجم

غراء خشب

مقابض دواليب قديمة أو أي شيء يمكن الإستعانة به للتعليق

Start with a vintage thrifted frame. You’ll want a piece of peg board cut down to the size of the inside of your frame. I got my 11 x 16 piece at a local hardware store and it cost $5 for the board and two cuts. I spray painted it a light shade of yellow, bu you could leave it natural as well.
إذا لم يكن حجم القطعة الفلينية مناسب للإطار فقومي بقصة ^^

Before securing the peg board to the frame I make a couple loops for hanging dangling earrings. I cut a piece of ribbon about 3 inches long and strung it through two holes.
إحدى الطرق للتعليق هلى الإستعانة بالشرائط

قومي بتثبيت الشريط كما في الصور

I double knotted the back.

Next I glued with wood glue the peg board to the back of the frame. If your frame has clips you can use those as well. My frame was really old and only had one clip so it needed something else to hold it in place.
يمكنكم إن أردتم أن تقومو بضبغ القطعة الفلينية إذا لم يعجبكم لونها

I picked up some of these knobs and hook on sale from my local Anthropologie. You can also look for them at antique stores.
نأتي الأن إلى العلاقات والمقابض

ونقوم بتثبيتها بالفتحات الموجودة على لفلينة

The hook’s holes didn’t quite line up with the peg board’s so I tied ribbon through like I did for the earring loops.

Then I installed my knobs and hung my jewelry. If your knobs are missing hardware in the back you can take it to your local hardware store and have them help you find the right bolt.

(Source.)

الأن يمكنكم الإستمتاع بها في أي وقت

وحفظ أدواتكم من الضياع والتشابك

(via craft4all)

Page 1 of 1